Animation options
Amet minim mollit non deserunt ullamco est sit aliqua dolor do amet sint. Velit officia consequat duis enim velit mollit. Show feature
{{ item.label }}
Show measurements
"TAB010"
Solution with SELECT TL1 toilet lifter, PLUS support arms, toilet and toilet seat Dania.
The product package shown is intended for illustrative purposes only, consisting of R8212000, R2098000, R27112, R370385112 and R370485112. Please contact Pressalit to discuss any specific requirements
{{ productPrice.unitPrice.displayValue }}
Products in this bundle
5 products included
Specifications for Toilet seat Dania without cover
EAN 5708590321264
ETIM EC011526
HMI 108576
NBS N13:300
NRF 6190537
UNSPSC 42211614
VVS 615678112
ETIM EC011526
HMI 108576
NBS N13:300
NRF 6190537
UNSPSC 42211614
VVS 615678112
Item number
R27112-D92999
Product group
Toilet seats
Product
Toilet seat Dania without cover
Product description
Toilet seat, Dania, with stabilising buffers, without cover, incl. extra strong cross bar hinge with 100 mm bolt.
Description
Toilet seat, Dania, with stabilising buffers, without cover, incl. extra strong cross bar hinge with 100 mm bolt.
Colour
Anthracite grey
Materials
Seat: Thermoset plastic (urea)
Strap: Stainless steel V2A
Strap: Stainless steel V2A
Ergonomy
An ergonomically designed seat that is well suited to most people. Sideways transfer is easy because the seat is rather flat.
Product capacity
This product has been tested statically up to 375 kg. As the European standard for technical aids for disabled, BS/EN 12182:2012, requires a static test with safety factor 1.5, the nominal maximum load for this product is therefore 250 kg.
Dimensioned drawing, mm
Hinge model
D92
Hinge drawing
Mounting
Bottom mounted
Sales unit
pcs
Weight
2.257 kg
Carton size
457x389x68 mm
Gross weight
2.657 kg
Weight per crate
13.285 kg
Crates per pallet
18
Qty per crate
5
Qty per pallet
90
Cleaning
Use a mild soap solution to clean the toilet seat. Please take care that the seat and hinges are not left damp. For disinfecting the seat, e.g. ethanol 85% can be used. Make sure that the product is wiped down with a soft rag wrung out in clear water and dried off with a soft, dry cloth immediately after disinfection. Avoid contact of the seat and hinges with abrasive, corrosive or chlorine-based cleaners, as these may cause damage or lead to flash rust. Therefore, when cleaning the bowl, make sure that the seat and cover are kept in an upright position until all cleaning agent has been flushed away.
Warranty
Your Pressalit toilet seat is subject to a 10-year product warranty against presentation of receipt. You should contact the dealer or store where you purchased the seat in the event of a complaint. In the event of complaints about defective materials and/or manufacturing defects and/or functional limitations ascertained within a 10-year period, following proper use and cleaning of the toilet seat (we reserve the right to examine the toilet seat at our factory), Pressalit will deliver spare parts or replace the toilet seat by an identical or similar model. If the color is no longer available, Pressalit reserves its right to replace the toilet seat by a similar model in the color white. Upon replacement or delivery of a spare part, the warranty period will not be extended nor renewed. If replacement is not possible, Pressalit may instead refund the purchase price.
Subject to changes in the product range, technical changes and printing errors.
Product fits
Manufacturer
Bowl
IFÖ Sanitär AB
Sign
Spira
Spira, høj , lukket S-lås, rimfree
Cera væghængt
Spira
Spira, høj , lukket S-lås, rimfree
Cera væghængt
Laufen AG
Pro-N
Gustavsberg (V & B)
Nautic
Saval Pro
Saval Pro
Keramag AG (Geberit)
Renova Nr. 1
Villeroy & Boch
O.novo Vita
O.Novo rimfree
Omnia Classic
O.Novo rimfree
Omnia Classic
LAUFEN CZ s. r. o.
Deep by Jika New
Geberit International AG
Renova Nr. 1
Grohe A/S
Bau Ceramic
VITRA
Matrix
Pressalit A/S
O.Novo ny skyllekant
R2099
R2099
Specifications for SELECT TL1 toilet lifter, for floor outlet
EAN 5708590341453
ETIM EC010062
GMDN 63055
HMI 105972
NRF 6191032
UNSPSC 42211615
VVS 617996000
ETIM EC010062
GMDN 63055
HMI 105972
NRF 6191032
UNSPSC 42211615
VVS 617996000
Item number
R8212000
Product group
Toilet lifters
Product
SELECT TL1 toilet lifter, for floor outlet
Product description
The aim is to make it as easy as possible for users to get on and off the toilet during daily use. The aim is also to make the carer’s work easier, and make the process comfortable and dignified for the user.
Description
SELECT TL1 toilet lifter, 400 mm electrically height adjustable with wired hand control.
Incl. cistern with dual flushing system preset at 3/6 litres.
Toilet pan and toilet seat to be ordered separately.
For floor-outlet.
Materials: Anodised aluminium and polystyrene (PS).
Excl. mounting kit.
Incl. cistern with dual flushing system preset at 3/6 litres.
Toilet pan and toilet seat to be ordered separately.
For floor-outlet.
Materials: Anodised aluminium and polystyrene (PS).
Excl. mounting kit.
Mounting instructions
Excl. mounting kit. See Technical datasheet (pdf) for information on mounting kits suitable for various wall types.
Colour
White
Intended use
Toilet lifters ensure optimum ergonomics at a toilet, for both seated and standing users with disabilities.
Expected service life is 10 years, provided that maintenance is carried out as described in the user manual.
Expected service life is 10 years, provided that maintenance is carried out as described in the user manual.
Designer
Rasmus Thygesen
Design year
2013
Materials
Anodized aluminium.
The front plates are made of polystyrene (PS).
Top plate in compact laminate.
Flammability-tested (ISO 8191-1 and ISO 8191-2). Test report available.
The front plates are made of polystyrene (PS).
Top plate in compact laminate.
Flammability-tested (ISO 8191-1 and ISO 8191-2). Test report available.
Ergonomy
Toilet lifters are available in three different colours which all harmonise with modern bathrooms, resulting in a comfortable and inviting toilet environment. Rounded corners and edges make cleaning quick and easy – there are no concealed edges or holes where dirt can hide.
Features
The toilet lifter is available with a wired hand control which makes it easy for the user or helper to adjust the height. Seat height can be adjusted a full 400 mm from 425 to 825 mm – even while the user is sitting on the toilet.
Product capacity
Maximum user weight: 200 kg.
Maximum load: 235 kg. (user weight + accessories).
When the toilet lifter is loaded with 235 kg, each wall fastener is loaded with 65 kg.
The toilet lifter has been tested statically with 600 kg, which is a requirement according to the applied assistive products standards. Please note that most toilet pans compatible with this lifter have been tested up to 400 kg.
Maximum load: 235 kg. (user weight + accessories).
When the toilet lifter is loaded with 235 kg, each wall fastener is loaded with 65 kg.
The toilet lifter has been tested statically with 600 kg, which is a requirement according to the applied assistive products standards. Please note that most toilet pans compatible with this lifter have been tested up to 400 kg.
Dimensioned drawing, mm
Adjustability
Height adjustable
Adjustment height
400 mm
Mains connection (V)
230 V~
Hz
50/60 Hz
IP
IPX6
Power consumption (maximum load)
70 W
Power consumption (standby)
2 W
Speed upwards
12 mm/s
Speed, downwards
12 mm/s
Noise level
48 dB
Actuator (motor)
LA31 Careline, (Linak), 4000N, IPX6
Control box
CB9 Careline, (Linak), IPX6
Wired remote control
HB3 (Linak), IP66
Maximum user weight (MUM)
200 kg
Safe working load (SWL)
235 kg
Sales unit
pcs
Weight
54.7 kg
Gross weight
57.7 kg
Weight per crate
57.7 kg
Crates per pallet
1
Qty per crate
1
Qty per pallet
1
Cleaning
SELECT TL1, TL2 toilet lifter
The product is to be cleaned with hot water or a mild soapy cleaning agent.
Do not use chlorine based, corrosive or abrasive cleaners as it may result in the surface being damaged.
The following cleaning agents have been tested by Pressalit and may be used, as long as they are diluted according to the instructions on the container.
DISINFECTANTS:
Clinimax Difficil-S
Erisan OXY+
Sprit (husholdningssprit)
Suma Bac D10
Virkon
Rodalon Desinfektionsspray
Lysoformin Spezial
CaviCide
Sufanios Premium
Tvättsprit 70%
NON-DISINFECTANTS:
Suma Star free D1
Taski 100
Taski 200
Milizid Citro
The product must be wiped down with a soft rag wrung out in clear water immediately after cleaning, as some materials may otherwise be discolored and stained, and the surface coating may deteriorate.
DECALCIFICATION OF ALUMINUM PARTS:
Pressalit recommends that chalky deposits be removed from wall tracks and other aluminum parts using a solution of three parts 30% acetic acid to seven parts tap water. When the aluminum parts have been washed down with this solution, the parts must be wiped over with a damp cloth wrung out in clear water.
Declaration of conformity
CE UK MDR-MASK-RoHS This product is in compliance with all relevant requirements of:
- Regulation (EU) 2017/745 on medical devices
- Council Directive 2006/42/EC on machinery
- Council Directive 2011/65/EC on RoHS. For the UK:
- Medical Device Regulation (MDR) 2002 on medical devices.
- Supply of Machinery (Safety) Regulations 2008
- Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012.
- Regulation (EU) 2017/745 on medical devices
- Council Directive 2006/42/EC on machinery
- Council Directive 2011/65/EC on RoHS. For the UK:
- Medical Device Regulation (MDR) 2002 on medical devices.
- Supply of Machinery (Safety) Regulations 2008
- Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012.
Warranty
Pressalit makes a commitment to remedy material and manufacturing defects for a period of five years from the invoicing date.
PLUS support arm with integrated counter-balance, 850 mm, left hand operated
Product no.: R370385112
Multiple variants
Specifications for PLUS support arm with integrated counter-balance, 850 mm, left hand operated
EAN 5708590368139
ETIM EC010078
FDA ILS/D135866
GMDN 35585
HMI 125881
NRF 6191087
RSK 8487443
UNSPSC 42211612
VVS 615875212
ETIM EC010078
FDA ILS/D135866
GMDN 35585
HMI 125881
NRF 6191087
RSK 8487443
UNSPSC 42211612
VVS 615875212
Item number
R370385112
Previous version
R3175, RF175
Product group
Support arms and arm supports
Product
PLUS support arm with integrated counter-balance, 850 mm, left hand operated
Product description
All PLUS support arms come with an integrated counter-balance, which ensures a controlled movement between horizontal and vertical positions.
Suitable for use with toilet pans projecting 700 mm or floor standing toilets.
Replaces discontinued models R3175 og RF175.
Suitable for use with toilet pans projecting 700 mm or floor standing toilets.
Replaces discontinued models R3175 og RF175.
Description
PLUS support arm, counter-balanced. Projection 880 mm, ergonomically shaped to provide a clear sense of where the support arm ends. Left hand operated. Height adjustable by 240 mm without using tools. Detachable and foldable. Anthracite cover plate for vertical wall track.
Materials: The arms are constructed of 10-micrometre anodized aluminium, with a non-slip gripping surface made of soft SEBS incorporating a glass-reinforced nylon core
Excl. mounting kit.
Materials: The arms are constructed of 10-micrometre anodized aluminium, with a non-slip gripping surface made of soft SEBS incorporating a glass-reinforced nylon core
Excl. mounting kit.
Mounting instructions
Excl. mounting kit. See Technical datasheet (pdf) for information on mounting kits suitable for various wall types.
Colour
Anthracite grey
Intended use
The support arm is used as a suport for a user, when he or she sits down or gets up from a toilet.
Expected service life is 10 years, provided that maintenance is carried out as described in the user manual.
Expected service life is 10 years, provided that maintenance is carried out as described in the user manual.
Designer
Rasmus Thygesen
Design year
2011
Materials
The arms are primarily constructed in 10-micrometre anodized aluminium, with a non-slip gripping surface at the end made of soft SEBS and incorporating a glass-reinforced nylon core.
The hinge arm is also made of soft SEBS.
Internal components and fasteners are primarily made of stainless steel.
The hinge barrel is capped with ABS polymer.
The hinge arm is also made of soft SEBS.
Internal components and fasteners are primarily made of stainless steel.
The hinge barrel is capped with ABS polymer.
Ergonomy
The oval shape gives an easy and comfortable surface to lean and push against.
The end of the support arm is enlarged so that it is easier to pull forward from a sitting position and also provides a clear sense of where the support arm ends.
Soft and slip-resistant material that has a warm feel.
The end of the support arm is enlarged so that it is easier to pull forward from a sitting position and also provides a clear sense of where the support arm ends.
Soft and slip-resistant material that has a warm feel.
Features
Folds against the wall.
The underside is shaped for the mounting of various accessories.
The underside is shaped for the mounting of various accessories.
Product capacity
Maximum load: 150 kg.
When the support arm is loaded with 150 kg, each wall fastener in the vertical wall track is loaded with 50 kg.
PLUS support arms have been tested statically with 700 kg (close to the wall), 425 kg (in the middle) and 225 kg (the outermost point).
When the support arm is loaded with 150 kg, each wall fastener in the vertical wall track is loaded with 50 kg.
PLUS support arms have been tested statically with 700 kg (close to the wall), 425 kg (in the middle) and 225 kg (the outermost point).
Dimensioned drawing, mm
Adjustability
Height adjustable
Adjustment height
240 mm
Maximum user weight (MUM)
150 kg
Safe working load (SWL)
150 kg
Sales unit
pcs
Weight
4.35 kg
Carton size
1060x245x275 mm
Gross weight
6.036 kg
Weight per crate
6.036 kg
Crates per pallet
16
Qty per crate
1
Qty per pallet
16
Cleaning
PLUS support arms
The product is to be cleaned with hot water or a mild soapy cleaning agent.
Do not use chlorine based, corrosive or abrasive cleaners as it may result in the surface being damaged.
The following cleaning agents have been tested by Pressalit and may be used, as long as they are diluted according to the instructions on the container.
DISINFECTANTS:
Clinimax Difficil-S
Erisan OXY+
Sprit (husholdningssprit)
Suma Bac D10
Virkon
Rodalon Desinfektionsspray
Lysoformin Spezial
CaviCide
Sufanios Premium
Tvättsprit 70%
Oxyplus-acid 2% (Diversey)
WipeClean UniversalCleaning
Chrolorine Disinfection Wipes
NON-DISINFECTANTS:
Suma Star free D1
Taski 100
Taski 200
Milizid Citro
The product must be wiped down with a soft rag wrung out in clear water immediately after cleaning, as some materials may otherwise be discolored and stained, and the surface coating may deteriorate.
DECALCIFICATION OF ALUMINUM PARTS:
Pressalit recommends that chalky deposits be removed from wall tracks and other aluminum parts using a solution of three parts 30% acetic acid to seven parts tap water. When the aluminum parts have been washed down with this solution, the parts must be wiped over with a damp cloth wrung out in clear water.
Declaration of conformity
CE MDR This product is in compliance with all relevant requirements of: - Regulation (EU) 2017/745 on medical devices.
Warranty
Pressalit makes a commitment to remedy material and manufacturing defects for a period of five years from the invoicing date.
Intended use
The support arm is used as a support for sitting down or getting up from a toilet, or for sideways transfer from a wheelchair.
Operating environment
For indoor use in a wet environment, such as a bathroom or a washroom, in private homes, nursing homes and hospitals.
For institutional use, the expected life time is 10 years.
Life cycle test performed according to ISO 17966:2016.
For maintenance, please refer to user guide, which is enclosed with the product, and which can also be found on the website under "Downloads".
Specifications for Wall-hung toilet. rimless, 540 mm
EAN 5708590377155
ETIM EC011289
NRF 6191063
UNSPSC 30181505
VVS 613232000
ETIM EC011289
NRF 6191063
UNSPSC 30181505
VVS 613232000
Item number
R2098000
Product group
Toilets
Product
Wall-hung toilet. rimless, 540 mm
Product description
Toilet, wall-hung, distance from wall to the front: 540 mm
Excl. mounting kit.
Excl. mounting kit.
Description
Toilet, wall-hung, distance from wall to the front: 540 mm.
Excl. mounting kit.
Excl. mounting kit.
Colour
White
Materials
Ceramic
Ergonomy
Wall-hung toilet makes mounting possible at individual height. Leaves space for foot support, the legs of a mobile hoist, and the carer's feet.
Product capacity
Max load: 400 kg.
Dimensioned drawing, mm
Sales unit
pcs
Weight
18 kg
Gross weight
19.35 kg
Weight per crate
19.35 kg
Crates per pallet
12
Qty per crate
1
Qty per pallet
12
Warranty
Pressalit makes a commitment to remedy material and manufacturing defects for a period of five years from the invoicing date.
PLUS support arm with integrated counter-balance, 850 mm, right hand operated
Product no.: R370485112
Multiple variants
Specifications for PLUS support arm with integrated counter-balance, 850 mm, right hand operated
EAN 5708590368252
ETIM EC010078
FDA ILS/D135866
GMDN 35585
HMI 123500
NRF 6191098
RSK 8487447
UNSPSC 42211612
VVS 615875512
ETIM EC010078
FDA ILS/D135866
GMDN 35585
HMI 123500
NRF 6191098
RSK 8487447
UNSPSC 42211612
VVS 615875512
Item number
R370485112
Previous version
R3185, RF185, R3148, RF148
Product group
Support arms and arm supports
Product
PLUS support arm with integrated counter-balance, 850 mm, right hand operated
Product description
All PLUS support arms come with an integrated counter-balance, which ensures a controlled movement between horizontal and vertical positions.
Suitable for use with toilet pans projecting 700 mm or floor standing toilets.
Replaces discontinued models R3185 og RF185.
Suitable for use with toilet pans projecting 700 mm or floor standing toilets.
Replaces discontinued models R3185 og RF185.
Description
PLUS support arm, counter-balanced. Projection 880 mm, ergonomically shaped to provide a clear sense of where the support arm ends. Right hand operated. Height adjustable by 240 mm without using tools. Detachable and foldable. Anthracite cover plate for vertical wall track.
Materials: The arms are constructed of 10-micrometre anodized aluminium, with a non-slip gripping surface made of soft SEBS incorporating a glass-reinforced nylon core
Excl. mounting kit.
Materials: The arms are constructed of 10-micrometre anodized aluminium, with a non-slip gripping surface made of soft SEBS incorporating a glass-reinforced nylon core
Excl. mounting kit.
Mounting instructions
Excl. mounting kit. See Technical datasheet (pdf) for information on mounting kits suitable for various wall types.
Colour
Anthracite grey
Intended use
The support arm is used as a suport for a user, when he or she sits down or gets up from a toilet.
Expected service life is 10 years, provided that maintenance is carried out as described in the user manual.
Expected service life is 10 years, provided that maintenance is carried out as described in the user manual.
Designer
Rasmus Thygesen
Design year
2011
Materials
The arms are primarily constructed in 10-micrometre anodized aluminium, with a non-slip gripping surface at the end made of soft SEBS and incorporating a glass-reinforced nylon core.
The hinge arm is also made of soft SEBS.
Internal components and fasteners are primarily made of stainless steel.
The hinge barrel is capped with ABS polymer.
The hinge arm is also made of soft SEBS.
Internal components and fasteners are primarily made of stainless steel.
The hinge barrel is capped with ABS polymer.
Ergonomy
The oval shape gives an easy and comfortable surface to lean and push against.
The end of the support arm is enlarged so that it is easier to pull forward from a sitting position and also provides a clear sense of where the support arm ends.
Soft and slip-resistant material that has a warm feel.
The end of the support arm is enlarged so that it is easier to pull forward from a sitting position and also provides a clear sense of where the support arm ends.
Soft and slip-resistant material that has a warm feel.
Features
Folds against the wall.
The underside is shaped for the mounting of various accessories.
The underside is shaped for the mounting of various accessories.
Product capacity
Maximum load: 150 kg.
When the support arm is loaded with 150 kg, each wall fastener in the vertical wall track is loaded with 50 kg.
PLUS support arms have been tested statically with 700 kg (close to the wall), 425 kg (in the middle) and 225 kg (the outermost point).
When the support arm is loaded with 150 kg, each wall fastener in the vertical wall track is loaded with 50 kg.
PLUS support arms have been tested statically with 700 kg (close to the wall), 425 kg (in the middle) and 225 kg (the outermost point).
Dimensioned drawing, mm
Adjustability
Height adjustable
Adjustment height
240 mm
Maximum user weight (MUM)
150 kg
Safe working load (SWL)
150 kg
Sales unit
pcs
Weight
4.35 kg
Carton size
1060x245x275 mm
Gross weight
6.036 kg
Weight per crate
6.036 kg
Crates per pallet
16
Qty per crate
1
Qty per pallet
16
Cleaning
PLUS support arms
The product is to be cleaned with hot water or a mild soapy cleaning agent.
Do not use chlorine based, corrosive or abrasive cleaners as it may result in the surface being damaged.
The following cleaning agents have been tested by Pressalit and may be used, as long as they are diluted according to the instructions on the container.
DISINFECTANTS:
Clinimax Difficil-S
Erisan OXY+
Sprit (husholdningssprit)
Suma Bac D10
Virkon
Rodalon Desinfektionsspray
Lysoformin Spezial
CaviCide
Sufanios Premium
Tvättsprit 70%
Oxyplus-acid 2% (Diversey)
WipeClean UniversalCleaning
Chrolorine Disinfection Wipes
NON-DISINFECTANTS:
Suma Star free D1
Taski 100
Taski 200
Milizid Citro
The product must be wiped down with a soft rag wrung out in clear water immediately after cleaning, as some materials may otherwise be discolored and stained, and the surface coating may deteriorate.
DECALCIFICATION OF ALUMINUM PARTS:
Pressalit recommends that chalky deposits be removed from wall tracks and other aluminum parts using a solution of three parts 30% acetic acid to seven parts tap water. When the aluminum parts have been washed down with this solution, the parts must be wiped over with a damp cloth wrung out in clear water.
Declaration of conformity
CE MDR This product is in compliance with all relevant requirements of: - Regulation (EU) 2017/745 on medical devices.
Warranty
Pressalit makes a commitment to remedy material and manufacturing defects for a period of five years from the invoicing date.
Intended use
The support arm is used as a support for sitting down or getting up from a toilet, or for sideways transfer from a wheelchair.
Operating environment
For indoor use in a wet environment, such as a bathroom or a washroom, in private homes, nursing homes and hospitals.
For institutional use, the expected life time is 10 years.
Life cycle test performed according to ISO 17966:2016.
For maintenance, please refer to user guide, which is enclosed with the product, and which can also be found on the website under "Downloads".
Specifications
Item number
TAB010
Product group
Toilet lifters
Product
Solution with SELECT TL1 toilet lifter, PLUS support arms, toilet and toilet seat Dania.
Product description
SELECT toilet lifters are developed with a clear focus on hygiene.
Images
360°
Please select where you want to buy the product
Find your nearest dealer
Find dealerFind online dealer
Solution with SELECT TL1 toilet lifter, PLUS support arms, toilet and toilet seat Dania.
{{ quantity }} {{ price.unitPrice.displayValue }} /
Pressalit A/S
Pressalitvej 1
DK-8680 Ry
Danmark
T +45 8788 8788
E pressalit@pressalit.com
Pressalit Limited
T 0118 923 2696
E uk@pressalit.com
